APG 80

Product: GM NG Alternator: ECP 32-3L/4 B Control System: 4520
INTRODUCTION

Aksa power generation system, providing optimum performance, and reliability, for stationary standby, prime power, and continuous duty applications. All generator sets are factory build, and production tested.

Certificate
  TS ISO 8528
  CE
  SZUTEST
  2000/14/EC
General Characteristics
Model Name APG 80
Frequency (Hz) 50
Fuel Type Natural Gas
Engine Made and Model GM NG - PSI 8.8L
Alternator Made and Model Mecc Alte - ECP 32-3L/4 B
Control Panel Model 4520
Canopy AK40-APG80
3 Phase, 50 Hz, PF 0.8
Voltage STANDBY RATING (ESP) PRIME RATING (PRP) Standby Amper
kVA kW kVA kW
400/231 80 64 - 115.47
STANDBY RATING (ESP) : Applicable for supplying power to varying electrical load for the duration of power interruption of a reliable utility source. ESP is in accordance with ISO 8528-1. Overload is not allowed.

PRIME RATING (PRP) : Applicable for supplying power to varying electrical load for unlimited hours. PRP is in accordance with ISO 8528-1. 10 % overload capability is available for a period of 1 hour within 12-hour perod of operation.
ENGINE SPECIFICATIONS
Engine GM NG
Engine Model PSI 8.8L
NO. OF CYLINDERS AND BUILD 8 cylinders - V type
BORE AND STROKE mm 110.49 X 114.30
TOTAL DISPLACEMENT L 8.800
Aspiration Naturally Aspirated
COMPRESSION RATIO 10.0:1
RATED SPEED (RPM) d/dk 1500
OIL CAPACITY L 8,5
Fuel Type
Natural Gas
Governor System
Electronic
Operating Voltage (Vdc)
12 Vdc
Battery and Capacity (Qty/Ah) 1x85
Cooling Method
Water Cooled
Cooling Fan Air Flow (m3/min) 120
Coolant Capacity (engine only / with radiator) (lt) /25,5
Air Filter
Dry Type
ALTERNATOR SPECIFICATIONS
Manufacturer Mecc Alte
Alternator Made and Model ECP 32-3L/4 B
Frequency (Hz) Hz 50
Power (kVA) kVA 75
Design   Brushless
Voltage V 400
Phase 3
A.V.R. DSR
Voltage Regulation (+/-) 1
Insulation System H
Protection IP23
Rated Power Factor 0.8
WEIGHT COMP. GENERATOR (Kg) 293
COOLING AIR (m³/min) m3 11.8
SIZE and WEIGHT
Open Type DRY WEIGHT (kg.)
(kg.)
LENGTH
(mm.)
WIDTH
(mm.)
HEIGHT
(mm.)
TANK CAPACITY (lt.) (Lt.)
1120 2150 1050 1543
CANOPY DRY WEIGHT (kg.)
(kg.)
LENGTH
(mm.)
WIDTH
(mm.)
HEIGHT
(mm.)
TANK CAPACITY (lt.) (Lt.)
AK40-APG80
1300 3100 1050 1641 N/A
STANDARD SPECIFICATIONS
Heavy duty, water cooled naturalgas engine 
46/50 °C ambient rated radiator with mechanical fan 
Protective grille for fan and rotating parts 
Electric starter and charge alternator 
Starting battery (with lead acid) including rack and cables 
Engine jacket cooling heater 
Base frame design incorporates an integral fuel tank and anti-vibration isolators 
Flexible fuel connection hoses 
Single bearing, class H alternator 
Industrial exhaust silencer and steel belows supplied separately 
Static battery charger 
Manual for use and installation
OPTIONAL EQUIPMENTS
ENGINE
  • Remote Radiator Cooling
  • Low Coolant level alarm
ALTERNATOR
  • Anti-Condensation heater
  • Over sized alternator
  • Main line circuit breaker
CONTROL SYSTEM
  • Remote annunciator panel
  • Uzağa alarm paneli
  • Alarm output relays
  • Earth fault, single set
  • Charging ammeter
TRANSFER ANAHTARI
  • Üç kutuplu kontaktör
  • Four Pole Contactor
VISE ACCESSORIES
  • Manual oil drain pump
  • Electrical oil drain pump
  • Enclosure: weater protective or sound attenuated
  • Duct adapter ( on radiator)
  • Inlet and outlet motorised louvers
  • Tool kit for maintenance
  • Supplied with oil and coolant - 30 °C
  • Automatic transfer switch
Control System: 4520
1 - Main Status and instrumentation display 
2 - Menu navigation buttons 
3 - Auto mode 
4 - Manual mode / start button 
5 - Reset/Stop button
Devices
DSE, model 4520 auto mains failure control module. 
Static battery charger. 
Emergency stop push button and fuses for control circuits.
CONSTRUCTION and FINISH

Comonents installed in sheet steel enclosure. Phosphate chemical, pre-coating of steel provides corrosion resistant surface.Polyester composite powder topcoat forms high gloss and extremely durable finish. Lockable hinged panel door provides for easy component access.
INSTALLATION
Control panel is mounted generating set baseframe on robust steel stand or power module. 
Located at side of generating set with properly panel visibility.
GENERATING SET CONTROL UNIT
The DSE 4520 conrol module is a standard addition to our generator sets between 10kva and 20kva and it has been designed to start and stop diesel generating sets that include electronic and non electronic engines. The DSE 4520 includes the additional capability of being able to monitor a mains (utility) supply and is therefore suitable for controlling a standby generating set in conjunction with an automatic transfer switch. The DSE4520 also indicates operational status and fault conditions, automatically shutting down the generating set and indicating faults by means of its LCD display on the front panel.

STANDARD SPECIFICATIONS
- *Microprocessor controlled. 
- *LCD display makes information easy to read. 
- *Front panel programming and also via PC software. 
- *Soft touch membrane keypad and two key menu navigation. 
- *Event logging (15) showing date and time. 
- *Date and time engine exercise mode and maintenance scheduler. 
- *Control buttons; stop, manuel/start, auto, menu navigation.

Instruments
ENGINE 
Engine speed 
Oil pressure 
Coolant temperature 
Run time 
Battery volts 
Engine maintenance due 
GENERATOR 
Voltage (L-L, L-N) 
Current (L1-L2-L3) 
Frequency 
kVA 
kW 
Pf 
kVAr 
kWh, kVAh, kVArh 
MAINS 
Voltage (L-L, L-N) 
Frequency
Protection Circuits
WARNING 
Charge failure 
Battery Low/High voltage 
Fail to stop 
Low fuel level (opt.) 
Over current 

PRE-ALARMS 
Low oil pressure 
High engine temperature 
Over /Under speed 
Under/over generator frequency 
Under/over generator voltage 
ECU warning 

SHUT DOWNS 
Fail to start 
Emergency stop 
Low oil pressure 
High engine temperature 
Low coolant level (opt.) 
Over /Under speed 
Under/over generator frequency 
Under/over generator voltage 
Oil pressure sensor open 

ELECTRICAL TRIP 
Generator over current


Options
High oil temperature shut down 
Low fuel level shut down 
Low fuel level alarm 
High fuel level alarm
Standards
Elecrical Safety / EMC compatibility 
BS EN 60950 Electrical business equipment 
BS EN 61000-6-2 EMC immunity standard 
BS EN 61000-6-4 EMC emission standard
STATIC BATTERY CHARGER
● Battery charger is manufactured with switching-mode and SMD technology and ıt has high efficinecy. Battery charger models' output V-I characteristic is very close to square and output is 5 amper, 13,8 V for 12 volt and 27,6 V for 24 V . Input 198 - 264 volt AC. Proline 2405 has fully output shot circuit protection and ıt can be used as a current source. Proline 1205/2405 charger has high efficiency, long life, low failure rate, light weight and low heat radiated in accordance with linear alternatives. The charger is fitted with a protection diode across the output. Connect charge fail relay coil between positive output and CF output. They are equipped with RFI filter to reduce electrical noise radiated from the device. Galvanically isolated input and output typically 4kV for high reliability.
Canopy: AK40-APG80
STANDARD SPECIFICATIONS


CANOPY MODEL AK40-APG80
WIDTH mm. 1050
LENGTH mm. 3100
HEIGHT mm. 1641
TANK CAPACITY (lt.) Lt. N/A