ADG 158

المنتج: HYUNDAI Alternator: ECP 34-1L/4 C نظام التحكم: DSE 6120
المقدمة
Aksa power generation system, providing optimum performance, and reliability, for stationary standby, prime power, and continuous duty applications. All generator sets are factory build, and production tested.
شهادة
  TS ISO 8528
  CE
  SZUTEST
  2000/14/EC
مواصفات عامة
اسم ورقم النموذج ADG 158
التردد (هرتز) 50
نوع الوقود Natural Gas
نموذج المولد الكهربائي وعلامته التجارية HYUNDAI - GE08TI
نموذج مولد التيار المتناوب وعلامته التجارية Mecc Alte - ECP 34-1L/4 C
نموذج ذو لوحة االتحكم DSE 6120
الحجرة MS 60 NG
3 الطور, 50 Hz, PF 0.8
الجهد الكهربائي طاقة ستاند باي (ESP) طاقة برايم (PRP) Standby Amper
kVA kW kVA kW
400/231 158 126.4 143 114.4 228.06
طاقة ستاند باي (ESP) : يستعمل الكهرباء المتغيرفي توفير الطاقة للحمولة في حال انقطاع مصدر الشبكة الآمن. ESP، متوافق مع ISO8528. لم يُسمح للتحميل المفرط.

طاقة برايم (PRP) : يستعمل الكهرباء المتغير في توفير الطاقة للحمولة من أجل ساعات العمل السنوية دون انقطاع. PRP، متوافق مع ISO8528. يتم استعمال ساعة واحدة من أجل التحميل الزائد 10% في فترة العمل 12 ساعة حسب ISO3046.
مواصفات المحرك
المحرك HYUNDAI
نموذج المحرك GE08TI
NO. OF CYLINDERS AND BUILD 6 cylinders - in line
الصدمة والتجويف mm 111 X 139
حجم الأسطوانة L 8.071
شفط الهواء Turbo Charged and Intercooled(Water to Air)
معدل الضغط 10.5:1
السرعة d/dk 1500
OIL CAPACITY L 23
الطاقة الاحتياطية كيلوواط ساعي / حصان (الاجمالية) 141/191
الطاقة الرئيسية كيلوواط ساعي / حصان (الاجمالية) 128/174
عدد أجهزة تسخين كتلة المحرك
1
طاقة أجهزة تسخين كتلة المحرك (واط) 1500
نوع الوقود
Natural Gas
الجهد الكهربائي للتشغيل (فولت تيار مستمر)
24 Vdc
البطارية والسعة (الكمية/الساعة) 2x85
تيار الشحن المتناوب (أمبير)
45
طريقة التبريد
Water Cooled
تدفق هواء مروحة التبريد (مترمكعب/دقيقة) 210
سعة سائل التبريد ( محرك فقط / مع الراديتور) (لتر) 18/157.8
فلتر الهواء
Dry Type
استهلاك الوقود عند 100% حمل (لتر/ساعة) 31.8
استهلاك الوقود عند 75% حمل (لتر/ساعة) 24.3
استهلاك الوقود عند 50% حمل (لتر/ساعة) 17.8
مولد التيار المتناوب مواصفات
Manufacturer Mecc Alte
نموذج مولد التيار المتناوب وعلامته التجارية ECP 34-1L/4 C
التردد (هرتز) Hz 50
الطاقة (كيلو فولت أمبير) kVA 150
التصميم   4 Pole,  Brushless
الجهد الكهربائي V 400
الطور 3
منظم الجهد الأوتوماتيكي DSR
منظم الجهد (+/-) 1
نظام العزل H
صنف الحماية IP23
عامل الطاقة 0.8
وزن المولد الكلي (كغ) 423
هواء التبريد m3 29.2
الحجم والوزن
فتح DRY WEIGHT (kg.)
(kg.)
الطول
(mm.)
العرض
(mm.)
الإرتفاع
(mm.)
سعة خزان (Lt.)
1960 2860 1300 1700
غطاء، DRY WEIGHT (kg.)
(kg.)
الطول
(mm.)
العرض
(mm.)
الإرتفاع
(mm.)
سعة خزان (Lt.)
MS 60 NG
2500 3960 1010 2100 N/A
مواصفات معيارية
-
الالات اختياري
ENGINE
• Remote Radiator Cooling
• Low Coolant level alarm
• Oil heater

ALTERNATOR
• Anti-Condensation heater
• Over sized alternator
• Main line circuit breaker

CONTROL SYSTEM
• Automatic synchronising and power control system ( multi gen-set Parallel )
• Paralel system with mains.
• Remote annunciator panel
• Uzağa alarm paneli
• Alarm output relays
• Remote communication with modem
• Earth fault, single set
• Charging ammeter

TRANSFER SWITCH
• Four Pole Contactor

VISE ACCESSORIES
• Manual oil drain pump
• Electrical oil drain pump
• Enclosure: weater protective or sound attenuated
• Duct adapter ( on radiator)
• Inlet and outlet motorised louvers
• Tool kit for maintenance
• 1500/3000 hours maintenance kit
• Supplied with oil and coolant - 30 °C
• Automatic transfer switch
نظام التحكم: DSE 6120
1. Menu navigation buttons 
2. Close mains button 
3. Main Status and instrumentation display 
4. Alarm LED's 
5. Close generator button 
6. Status LED's 
7. Operation selecting buttons
الأجهزة
●DSE, model 6120 Auto Mains Failure control module.
●Battery charger input 198-264 volt, output 27,6 V 5 A (24 V) or 13,8 Volt 5A (12V)
●Emergency stop push button and fuses for control circuits.
CONSTRUCTION and FINISH
●Components installed in sheet steel enclosure. Phosphate chemical, pre-coating of steel provides corrosion resistant surface. Polyester composite powder topcoat forms high gloss and extremely durable finish. Lockable and hinged panel door provides easy access to components.
التركيب
Control panel is mounted on baseframe with steel stand. Located at the right side of the generator set (When you look at the Gen.Set. from Alternator)
المولدات وحدة التحكم
The DSE 6120 module has been designed to monitor generator frequency, volt, current, engine oil pressure, coolant temperature running hours and battery volts.
Module monitors the mains supply and switch over to the generator when the mains power fails.
The DSE6120 also indicates operational status and fault conditions, Automatically shutting down the Gen. Set and giving true first up fault condition of Gen. Set failure.The LCD display indicates the fault.

مواصفات معيارية
●Microprocessor controlled.
●LCD display makes information easy to read.
●Automatically transfers between mains (utilty) and generator power.
●Manual programming on front panel.
●User-friendly set-up and button layout.
●Remote start.
●Event logging (50) showing date and time.
●Controls: Stop/Reset, Manual, Auto, Test, Start, buttons. An additional push button next to the LCD display is used to scroll through the modules' metering displays.

مؤشرات القياس
ENGINE
●Engine speed.
●Oil pressure.
●Coolant temperature.
●Run time.
●Battery volts.
●Configurable timing.

GENERATOR
●Voltage (L-L, L-N).
●Current (L1-L2-L3).
●Frequency.
●Gen. Set ready.
●Gen. Set enabled.

MAINS
●Mains ready.
●Mains enabled.
دارات الحماية
WARNING 
●Charge failure. 
●Battery Low/High voltage. 
●Fail to stop. 
●Low /High generator voltage. 
●Under /Over generator frequency. 
●Over /Under speed. 
●Low oil pressure. 
●High coolant temperature. 

SHUT DOWNS 
●Fail to start.
●Emergency stop. 
●Low oil pressure. 
●High coolant temperature. 
●Over /Under speed. 
●Under/over generator frequency. 
●Under/over generator voltage. 
●Oil pressure sensor open. 
●Coolant temperature sensor open. 

ELECTRICAL TRIP 
●Generator over current.


خيارات
●Flexible sensor can be controlled with temperature, pressure, percentage (warning/shutdown/electrical trip)
●Local setting parameters and monitoring from PC to control module with USB connection (max 6 mt).
المعايير
●Elecrical Safety / EMC compatibility
●BS EN 60950 Electrical business equipment.
●BS EN 61000-6-2 EMC immunity standard.
●BS EN 61000-6-4 EMC emission standard
مقوم البطارية الاستاتيكي (الشاحن)
● Battery charger is manufactured with switching-mode and SMD technology and ıt has high efficiency.
● Battery charger models' output V-I characteristic is very close to square and output is 5 amper, 13,8 V for 12 volt and 27,6 V for 24 V . Input 198 - 264 volt AC.
● The charger is fitted with a protection diode across the output.
● Connect charge fail relay coil between positive output and CF output.
● They are equipped with RFI filter to reduce electrical noise radiated from the device.
● Galvanically isolated input and output typically 4kV for high reliability.
الحجرة: MS 60 NG
مواصفات معيارية


نموذج ذو الحجرة MS 60 NG
العرض mm. 1010
الطول mm. 3960
الإرتفاع mm. 2100
سعة خزان Lt. N/A